Potential-Rate Correlations of Supported Palladium-Based Catalysts for Aqueous Formic Acid Dehydrogenation.

Aqueous formic acid dehydrogenation (FAD) is a crucial process for hydrogen production, as hydrogen is a clean energy carrier. During this process, formic acid converts into hydrogen and carbon dioxide over a catalyst. Pd-based catalysts have exhibited significant potential in FAD due to their high activity and selectivity. In this study, we investigated aqueous thermal FAD in a mixture of formic acid and sodium formate using electrochemical open-circuit potential (OCP) measurement by loading the catalysts onto a conductive substrate as a working electrode. By varying the reaction conditions such as the concentration of reactants and modifying Pd with Ag, different FAD rates were obtained. Consequently, we revealed the correlation between the catalyst OCP and FAD rate; superior FAD rates reflected a more negative catalyst OCP. Furthermore, deactivation was observed across all catalysts during FAD, with a concurrent increase in catalyst OCP. Interestingly, we found that the logarithm of the FAD rate showed a linear correlation with the OCP of the catalyst during the decay phase, which we quantitatively explained based on the reaction mechanism. This study presents a new discovery that bridges thermal and electrocatalysis.

Low-Temperature Hydrogenation of CO2 to Methanol in Water on ZnO-Supported CuAu Nanoalloys.

Optimizing processes and materials for the valorization of CO2 to hydrogen carriers or platform chemicals is a key step for mitigating global warming and for the sustainable use of renewables. We report here on the hydrogenation of CO2 in water on ZnO-supported CuAu nanoalloys, based on ≤7 mol % Au. Cux Auy /ZnO catalysts were characterized using 197 Au Mössbauer, in situ X-ray absorption (Au LIII - and Cu K-edges), and ambient pressure X-ray photoelectron (APXP) spectroscopic methods together with X-ray diffraction and high-resolution electron microscopy. At 200 °C, the conversion of CO2 showed a significant increase by 34 times (from 0.1 to 3.4 %) upon increasing Cu93 Au7 loading from 1 to 10 wt %, while maintaining methanol selectivity at 100 %. Limited CO selectivity (4-6 %) was observed upon increasing temperature up to 240 °C but associated with a ≈3-fold increase in CO2 conversion. Based on APXPS during CO2 hydrogenation in an H2 O-rich mixture, Cu segregates preferentially to the surface in a mainly metallic state, while slightly charged Au submerges deeper into the subsurface region. These results and detailed structural analyses are topics of the present contribution.

Growth mechanisms and anisotropic softness-dependent conductivity of orientation-controllable metal-organic framework nanofilms.

Conductive metal-organic frameworks (cMOFs) manifest great potential in modern electrical devices due to their porous nature and the ability to conduct charges in a regular network. cMOFs applied in electrical devices normally hybridize with other materials, especially a substrate. Therefore, the precise control of the interface between cMOF and a substrate is particularly crucial. However, the unexplored interface chemistry of cMOFs makes the controlled synthesis and advanced characterization of high-quality thin films, particularly challenging. Herein, we report the development of a simplified synthesis method to grow "face-on" and "edge-on" cMOF nanofilms on substrates, and the establishment of operando characterization methodology using atomic force microscopy and X-ray, thereby demonstrating the relationship between the soft structure of surface-mounted oriented networks and their characteristic conductive functions. As a result, crystallinity of cMOF nanofilms with a thickness down to a few nanometers is obtained, the possible growth mechanisms are proposed, and the interesting anisotropic softness-dependent conducting properties (over 2 orders of magnitude change) of the cMOF are also illustrated.

Supported Noble Metal Catalysts and Adsorbents with Soft Lewis Acid Functions.

Heterogeneous noble metal catalysts exhibit various functions. Although their redox functions have been extensively studied, we focused on their soft Lewis acid functions. Supported Au, Pt, and Pd catalysts electrophilically attack the π-electrons of soft bases such as alkynes, alkenes, and aromatic compounds to perform addition and substitution reactions. Hydroamination, intramolecular cyclization of alkynyl carboxylic acids, isomerization of allylic esters, vinyl exchange reactions, Wacker oxidation, and oxidative homocoupling of aromatics are introduced based on a discussion of the active species and reaction mechanisms. Furthermore, the adsorption of sulfur compounds, which are soft bases, onto the supported AuNPs is discussed. The adsorption and removal of 1,3-dimethyltrisulfane (DMTS), which is the compound responsible for the stale odor of "hine-ka" in alcoholic beverages, particularly Japanese sake, is described.

Integrated Soft Porosity and Electrical Properties of Conductive-on-Insulating Metal-Organic Framework Nanocrystals.

A one-stone, two-bird method to integrate the soft porosity and electrical properties of distinct metal-organic frameworks (MOFs) into a single material involves the design of conductive-on-insulating MOF (cMOF-on-iMOF) heterostructures that allow for direct electrical control. Herein, we report the synthesis of cMOF-on-iMOF heterostructures using a seeded layer-by-layer method, in which the sorptive iMOF core is combined with chemiresistive cMOF shells. The resulting cMOF-on-iMOF heterostructures exhibit enhanced selective sorption of CO2 compared to the pristine iMOF (298 K, 1 bar, S CO 2 / H 2 ${{_{{\rm CO}{_{2}}/{\rm H}{_{2}}}}}$ from 15.4 of ZIF-7 to 43.2-152.8). This enhancement is attributed to the porous interface formed by the hybridization of both frameworks at the molecular level. Furthermore, owing to the flexible structure of the iMOF core, the cMOF-on-iMOF heterostructures with semiconductive soft porous interfaces demonstrated high flexibility in sensing and electrical "shape memory" toward acetone and CO2 . This behavior was observed through the guest-induced structural changes of the iMOF core, as revealed by the operando synchrotron grazing incidence wide-angle X-ray scattering measurements.

Effects of Codoping on Site-Dependent Eu3+ Luminescence in Perovskite-Type Calcium Zirconate and Hafnate.

The single doping of Eu3+ and codoping with Ga3+ or La3+ into perovskite (ABO3)-type CaZrO3 and CaHfO3 were carried out to investigate the effect of codoping on the photoluminescence (PL) features of Eu3+, attempting the site-selective Eu3+ doping at either A or B sites. To comprehend the Eu3+ PL features, the accurate locations of Eu3+ were examined by X-ray absorption near edge structure (XANES) and the proportions of Eu3+ located at A or B sites (Eu3+(A) or Eu3+(B); EuCa• or EuZr'/EuHf') were analyzed. No considerable differences in the XANES spectra and in the proportions of Eu3+(A) and Eu3+(B) were observed in the single-doped samples. On the other hand, the shape of the XANES spectra and the Eu3+ proportion markedly differed in the codoped samples. Ga3+ codoping (GaZr'/GaHf') achieved Eu3+(A) proportions of more than 90%, and La3+ codoping (LaCa•) resulted in the largest Eu3+(B) proportions of approximately 40%. In both PL and PL excitation spectra, the site-dependent spectral features were changed depending on the proportion of Eu3+(A) and Eu3+(B), especially the PL peaks at 595 nm were intensified most in the La3+ codoped samples. Consequently, the site-dependent Eu3+ PL features in CZO and CHO were found to become more conspicuous by the effect of Ga3+ or La3+ codoping. The results also revealed that the codoped ions work not only to compensate for the charge of aliovalent Eu3+ but also to drive Eu3+ to the intentional doping sites.

Effects of the Pt Shell Thickness on the Oxygen Reduction Reaction on a Well-Defined Pd@Pt Core-Shell Model Surface.

The effect of the Pt shell thickness on the oxygen reduction reaction (ORR) of a Pd@Pt core-shell catalyst was studied using surface science technics and computational approaches. We found Pt shells on Pd rods to be negatively charged because of charge transfer from the Pd substrate when the shell thicknesses were 0.5 or 1 monolayer (ML). The activities of the ORR of the model surface with a Pt shell of 0.5 or 1 ML were similar and more than twice the activities of a Pt/C or Pt rod. The relationship between the ORR activity and the thickness of the Pt shell was the exact opposite of the relationship between the Pt binding energy and the Pt shell thickness. The indication was that more negatively charged Pt had higher ORR activity. Density functional theory calculations confirmed that a single layer of Pt atoms located on Pd was negatively charged compared to pure Pt and resulted in a lower barrier to the rate-limiting step of the ORR.

Nano-pulsed discharge plasma-induced abiotic oligopeptide formation from diketopiperazine.

Conventional oligopeptide synthesis techniques involve environmentally harmful procedures and materials. In addition, the efficient accumulation of oligopeptides under Hadean Earth environments regarding the origin of life remains still unclear. In these processes, the formation of diketopiperazine is a big issue due to the strong inhibition for further elongation beyond dipeptides. Hydrothermal media enables environmentally friendly oligopeptide synthesis. However, hydrothermal oligopeptide synthesis produces large amounts of diketopiperazine (DKP), due to its thermodynamic stability. DKP inhibits dipeptide elongation and also constitutes an inhibitory pathway in conventional oligopeptide synthesis. Here, we show an efficient pathway for oligopeptide formation using a specially designed experimental setup to run both thermal and non-thermal discharge plasma, generated by nano-pulsed electric discharge with 16-23 kV voltage and 300-430 A current within ca. 500 ns. DKP (14%) was converted to dipeptides and higher oligopeptides in an aqueous solution containing alanine-DKP at pH 4.5, after 20 min of 50 pps thermal plasma irradiation. This is the first study to report efficient oligopeptide synthesis in aqueous medium using nano-pulsed plasma (with thermal plasma being more efficient than non-thermal plasma) via DKP ring-opening. This unexpected finding is implicative to evaluate the pathway how the oligopeptides could have accumulated in the primitive Earth with high-energy plasma sources such as thunder as well as to facilitate the green synthesis of oligopeptides.

Anchored Palladium Complex-Generated Clusters on Zirconia: Efficiency in Reductive N-Alkylation of Amines with Carbonyl Compounds under Hydrogen Atmosphere.

Carbon-nitrogen bond formation is an important method on both laboratory and industrial scales because it realizes the production of valuable pharmaceuticals, agrochemicals, and fine chemicals. Direct reductive N-alkylation of amines with carbonyl compounds via intermediary imine compounds, especially under catalytic hydrogenation conditions, is one of the most convenient, economical, and environmentally friendly methods for this process. Here we report a novel palladium species on zirconia having specific activity towards hydrogenation of imines but other carbonyl groups remaining intact. The present catalytic property offers a practical synthetic method of functionalized secondary amines by reductive N-alkylation under mild conditions with high atom-efficiency. Mechanistic studies revealed that the catalytically active species is the palladium cluster, which is generated in situ from molecular palladium complexes on the support by exposure to atmospheric hydrogen. These fundamental findings are expected to progress in developing novel cluster catalysts for chemical processes directed towards a sustainable society.

Preparation of a platinum nanoparticle catalyst located near photocatalyst titanium oxide and its catalytic activity to convert benzyl alcohols to the corresponding ethers.

A novel platinum nanoparticle catalyst closely located near the surface of titanium oxide, PtNP/TiO2, has been prepared. This catalyst has both the properties of a photocatalyst and a metal nanoparticle catalyst, and acquired environmentally friendly catalytic activity, which cannot be achieved by just one of these catalysts, to afford ethers from benzyl alcohols under the wavelength of 420 nm.

Crystalline to amorphous transformation in solid-solution alloy nanoparticles induced by boron doping.

We synthesized a palladium-ruthenium-boron (Pd-Ru-B) solid-solution ternary alloy. Elemental mappings confirmed successful alloying of B with Pd-Ru body without changing the particle sizes, demonstrating the first discovery of this ternary alloy. Pair distribution function analysis revealed a drastic decrease in atomic correlation in Pd-Ru nanoparticles by B doping. This result gives the first example of structural transformation from crystalline to amorphous in solid-solution alloy nanoparticles induced by the doping of light elements.

Self-Assembled Multilayer Iron(0) Nanoparticle Catalyst for Ligand-Free Carbon-Carbon/Carbon-Nitrogen Bond-Forming Reactions.

Self-assembled multilayer iron(0) nanoparticles (NPs, 6-10 nm), namely, sulfur-modified Au-supported Fe(0) [SAFe(0)], were developed for ligand-free one-pot carbon-carbon/carbon-nitrogen bond-forming reactions. SAFe(0) was successfully prepared using a well-established metal-nanoparticle catalyst preparative protocol by simultaneous in situ metal NP and nanospace organization (PSSO) with 1,4-bis(trimethylsilyl)-1,4-dihydropyrazine (Si-DHP) as a strong reducing agent. SAFe(0) was easy to handle in air and could be recycled with a low iron-leaching rate in reaction cycles.

Optically Transparent Colloidal Dispersion of Titania Nanoparticles Storable for Longer than One Year Prepared by Sol/Gel Progressive Hydrolysis/Condensation.

The molecular catalyst sensitized system (MCSS), where an excited molecular catalyst adsorbed on a semiconductor such as TiO2 injects electrons to the conduction band of the semiconductor leading to hydrogen evolution/CO2 reduction coupled with an oxidation of water on the molecular catalyst, has been one of the most probable candidates in the approach to artificial photosynthesis. For a full utilization of visible light, however, a serious light scattering of the aqueous suspension of TiO2 in the visible region, which is generally experienced, should be avoided. Here, we report a preparation of optically transparent colloidal dispersion of TiO2 by the sol/gel reaction of TiCl4 through progressive hydrolysis/condensation under the basic condition without any calcination processes. The TiO2 nanoparticles (TiO2(NPs)) obtained were characterized as an amorphous particle (∼10-15 nm) having a microcrystal domain of anatase within several nm by XRD, Raman spectroscopies, XRF, XAFS, TG/DTA, and HRTEM, respectively. The energy-resolved distribution of carrier electron traps in TiO2(NPs) as a fingerprint of TiO2 was characterized through reversed double-beam photo-acoustic spectroscopy to have a close similarity to that of TiO2(ST-01) as well as the observation of carrier traps by transient absorption spectroscopy. Though the powder TiO2(NP) itself was not dispersed well in aqueous solution, the wet TiO2(NPs) as prepared before being dried up provided a completely transparent aqueous dispersion under the acidic condition (1 M HCl). Addition of methanol enabled the colloidal dispersion (TiO2(NPs, MeOH/H2O, 0.1 M HCl)) to keep the optical transparency for longer than 1 year (550 days), which is the first example of TiO2 dispersion storable for such a long period. TiO2(NPs, MeOH/H2O) exhibited a moderate photocatalytic reactivity of H2 evolution with a quantum yield of ∼2.6% upon 365 nm light irradiation. An optically transparent thin film of TiO2(NPs, MeOH/H2O) was also successfully prepared on a glass plate to exhibit an enhanced hydrophilicity upon UV light irradiation.

Competing Roles of Two Kinds of Ligand during Nonclassical Crystallization of Pillared-Layer Metal-Organic Frameworks Elucidated Using Microfluidic Systems.

To diversify metal-organic frameworks (MOFs), multi-component MOFs constructed from more than two kinds of bridging ligand have been actively investigated due to the high degree of design freedom afforded by the combination of multiple ligands. Predicting the synthesis conditions for such MOFs requires an understanding of the crystallization mechanism, which has so far remained elusive. In this context, microflow systems are efficient tools for capturing non-equilibrium states as they facilitate precise and efficient mixing with reaction times that correspond to the distance from the mixing point, thus enabling reliable control of non-equilibrium crystallization processes. Herein, we prepared coordination polymers with pillared-layer structures and observed the intermediates in the syntheses with an in-situ measurement system that combines microflow reaction with UV/Vis and X-ray absorption fine-structure spectroscopies, thereby enabling their rapid nucleation to be monitored. Based on the results, a three-step nonclassical nucleation mechanism involving two kinds of intermediate is proposed.

Site-Selective Doping and Site-Sensitive Photoluminescence of Eu3+ and Tb3+ in Perovskite-Type LaLuO3.

Eu3+ and Tb3+ ions were site-selectively doped into LaLuO3 with the orthorhombic perovskite-type structure (ABO3), and their luminescence properties were examined considering the doping sites (A or B sites). The X-ray diffraction analysis revealed the expansion or contraction of the unit cell volumes of the materials depending on the doping sites. The spectra of X-ray absorption near edge structure for the Eu and Tb LIII edge exhibited different shapes for the ions at A and B sites, confirming the site-selective doping of Eu3+ and Tb3+ in LaLuO3. The photoluminescence (PL) and PL excitation (PLE) spectra of the materials also showed some differences caused by the doping sites. The intensities of the Eu3+ PL peaks derived from the 5D0-7F1 transitions and those from the 5D0-7F2 transitions were markedly different between Eu3+ at A sites and those at B sites because of the different site symmetries. The splitting of the intense Tb3+ PL peaks originating from the 5D4-7F5 transitions and the absence of PL peaks from 5D3-7FJ transitions were found only for Tb3+ at B sites because of the strong crystal field at B sites. In addition to the PL spectra, the positions of PLE peaks originating from charge transfer transitions in Eu3+ and the 4f-5d transitions in Tb3+ depended on the doping sites. The successful site-selective doping enabled us to clarify the site-sensitive luminescence properties of Eu3+ and Tb3+ doped in the perovskite-type LaLuO3.

A new and practical Se(IV) removal method using Fe3+ type cation exchange resin.

An effective method for removing selenium (Se) from water is required from the viewpoint of environmental preservation. To establish this method, a cation exchange resin that adsorbed ferric ions was applied as an adsorbent. In this study, the adsorption behavior of Se to the adsorbent was examined by both batch and column methods. The batch experiment confirmed that selenite ions (Se(IV)) are effectively adsorbed but selenate ions (Se(VI)) are hardly adsorbed. To elucidate the adsorption mechanism, the Fe in the adsorbent and the Fe in the adsorbent after the adsorption of Se(IV) were characterized by Fe K-edge X-ray absorption spectroscopy and 57Fe Mӧssbauer spectroscopy. The analytical result of Se K-edge EXAFS spectra for the Se(IV) adsorbed on the adsorbent suggests that Se(IV) are adsorbed specifically to the adsorbent through the formation of Fe-O-Se bonds. The breakthrough curve obtained by the column experiment showed that Se(IV) in 3 tons of synthetic solution containing 0.1 ppm Se can be efficiently removed using a column in which 12.8 g (10.4 cm3) of the adsorbent was packed.

Solid-solution alloy nanoparticles of a combination of immiscible Au and Ru with a large gap of reduction potential and their enhanced oxygen evolution reaction performance.

Au and Ru are elements that are immiscible in the bulk state and have the largest gap in reduction potential among noble metals. Here, for the first time, Au x Ru1-x solid-solution alloy nanoparticles (NPs) were successfully synthesized over the whole composition range through a chemical reduction method. Powder X-ray diffraction and scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy showed that Au and Ru atoms are homogeneously mixed at the atomic level. We investigated the catalytic performance of Au x Ru1-x NPs for the oxygen evolution reaction, for which Ru is well known to be one of the best monometallic catalysts, and we found that even alloying with a small amount of Au could significantly enhance the catalytic performance.

Luminescence and Valence of Tb Ions in Alkaline Earth Stannates and Zirconates Examined by X-ray Absorption Fine Structures.

The difference in Tb3+ green luminescence intensities in doped perovskite(ABO3)-type alkaline earth stannates, AeSnO3 (Ae = Ca, Sr, Ba), and the Mg codoping effect on the luminescence intensities in doped CaMO3 (M = Sn, Zr) were investigated utilizing the X-ray absorption fine structures (XAFS) of the Tb LIII absorption edge. It is considered that the local symmetry at A sites is responsible for the different Tb3+ luminescence intensities in AeSnO3 (Ae = Ca, Sr, Ba) doped with Tb ions at A sites. However, it was found from the XAFS spectra that some Tb ions are unintentionally stabilized at B sites as Tb4+, especially in BaSnO3. Not only the central symmetry for Tb3+ at A sites but also the presence of Tb4+ at B sites were considered to bring about the absence of Tb3+ luminescence in doped cubic BaSnO3. No obvious changes in the Tb3+ local structure at A sites were detected between Tb single doped and Tb-Mg codoped CaMO3 (M = Sn, Zr) from the extended XAFS oscillation, but the trace of Tb4+ at B sites in the Tb single doped sample was observed in the X-ray absorption near edge structures. It is, therefore, considered that the Tb3+ luminescence enhancement by Mg codoping is primarily attributed to the charge compensation rather than the changes in the local structure around Tb3+ at A sites.

Wacker Oxidation of Terminal Alkenes Over ZrO2 -Supported Pd Nanoparticles Under Acid- and Cocatalyst-Free Conditions.

Highly efficient Wacker oxidation of aromatic or aliphatic terminal alkenes into methyl ketones and benzofurans is developed by using reusable Pd0 nanoparticles (NPs) supported on ZrO2 under acid- and cocatalyst-free conditions. Molecular oxygen or air can be utilized as the terminal oxidant, which results in the formation of H2 O as the only theoretical byproduct. The activation of the Pd NPs by O2 plays an important role in promoting this reaction. Interestingly, PdO supported on ZrO2 showed no activity. Additionally, the Pd particle size significantly affects the catalytic activity, with an apparent optimal diameter of 4-12 nm. In addition to the heterogeneous catalyst forms, the Pd NPs can be generated from a Pd0 complex during the reaction, and these particles are even recyclable.

Efficient Decarbonylation of Furfural to Furan Catalyzed by Zirconia-Supported Palladium Clusters with Low Atomicity.

Decarbonylation of furfural to furan was efficiently catalyzed by ZrO2 -supported Pd clusters in the liquid phase under a N2 atmosphere without additives. Although Pd/C and Pd/Al2 O3 have frequently been used for decarbonylation, Pd/ZrO2 exhibited superior catalytic performance compared with these conventional catalysts. Transmission electron microscopy and X-ray absorption fine structure measurements revealed that the size of the Pd particles decreased with an increase in the specific surface area of ZrO2 . ZrO2 with a high surface area immobilized Pd as clusters consisting of several (three to five) Pd atoms, whereas Pd aggregated to form nanoparticles on other supports such as carbon and Al2 O3 despite their high surface areas. The catalytic activity of Pd/ZrO2 was enhanced with a decrease in particle size, and the smallest Pd/ZrO2 was the most active catalyst for decarbonylation. When CeO2 was used as the support, a decrease in Pd particle size with an increase in surface area was also observed. Single Pd atoms were deposited on CeO2 with a high surface area, with a strong interaction through the formation of a Pd-O-Ce bond, which led to a lower catalytic activity than that of Pd/ZrO2 . This result suggests that zero-valent small Pd clusters consisting of more than one Pd atom are the active species for the decarbonylation reaction. Recycling tests proved that Pd/ZrO2 maintained its catalytic activity until its sixth use.